Filter
Top Products
( 2 / 5 )
1. Outline
The M32176T-PTC is a converter board for featuring the
debugging function such as real-time tracing when using a
Renesas M32R emulator with the M32176FxxFP.
2. Package Components
(1) M32176T-PTC converter board
(2) YQPACK144SD (made by Tokyo Eletech Corporation)
(3) NQPACK144SD (made by Tokyo Eletech Corporation)
(4) YQ-GUIDE's (4 pieces)
(5) Screwdriver (made by Tokyo Eletech Corporation)
(6) M32176T-PTC User's Manual (This manual)
3. Specifications
Table 1 Specifications
4. Usage
The M32176T-PTC can be used for debugging and board
mounted evaluation in common by mounting the
NQPACK144SD on the target board.
(1) For debugging
Mount the NQPACK144SD (included with the M32176T-
PTC) on the 144QFP foot pattern of the target board.
Then connect the M32176T-PTC via the YQPACK144SD.
As the M32176F4VWG is mounted on the M32176T-
PTC, all functions of the emulator such as real-time
tracing can be used.
(2) For board-mounted evaluation
Mount the M32176FxxFP and the HQPACK144SD (sepa-
rately available) in that order on the NQPACK144SD on
the target system.
Before using the M32176T-PTC, be sure to read "8. Precau-
tions" on page 5.
Figure 1 Package components of the M32176T-PTC
Figure 2 Usage of the M32176T-PTC
M32176T-PTC
YQ-GUIDE's (x4)
Screwdriver
YQPACK144SD
NQPACK144SD
Applicable package
Supported MCU
Supported emulator
Mounted MCU
Clock
Power supply
144P6Q-A
(144-pin 0.5-mm-pitch QFP)
M32176FxxFP
M32170T-SDI
M32100T-SDI-E
M32100T2-SDI-E
M32100T3-SDI-E
M32176F4VWG
10 MHz
Supplied from target board
(1) For debugging
Interface cables of the pod probe
M32176T-PTC
YQ-GUIDE's (x4)
YQPACK144SD
NQPACK144SD
144-pin 0.5-mm-pitch
(144P6Q-A) foot patern
M32176FxxFP
HQPACK144SD
(separately available)
(2) For board-mounted
evaluation
: position of No. 1 pin
Be sure to align No. 1 pin.