Renesas M37515T-PTC Computer Hardware User Manual


  Open as PDF
of 4
 
1. Description
This product converts the 64-pin LCC package (64D0)
for 7515 and 7516 Group MCUs to the pin
assignments of the 48-pin 0.5mm pitch LQFP package
(PLQP0048
KB-A), and connects the emulator and target.
2. Package Components (see Figure 1)
(1) M37515T-PTC converter
board
Figure 1 Package components of M37515T-PTC
(1) M37515T-PTC main unit
(2/4)
3. Specifications
Table 1 Specifications
(2) TQSOCKET048SDP
4. Application (see Figure 2)
(1) For debugging
Mount TQPACK048SD on the target. On top of it,
mount TQSOCKET048SDP and M37515T-PTC in
that order. Then connect the probe of the
emulation pod to the connector provided at the top
of M37515T-PTC.
(2) For board-mounted evaluation
Mount the 64-pin LCC MCU to 64LCC-DMS.
This
product can be used during debugging and board-
mounted evaluation in common.
Before using M37530T-PTCB, be sure to read the
precautions on page 4.
Figure 2 Usage of M37515T-PTC
Figure 3 Connection procedure of M37515T-PTC
M37515T-PTC
TQSOCKET048SDP
TQPACK048SD
(1)
5. Connection Procedure (see Figure 3)
(1) Mount the TQPACK048SD.
(2) Attach the TQSOCKET048SDP to the TQPACK048SD.
(3) Attach the M37515T-PTC to the TQSOCKET048SDP.
(2)
(3)
The connection procedure of M37515T-PTC is shown
below.
(3) TQPACK048SD
(4) M37515T-PTC Instruction Manual (this manual)
(2) TQSOCKET048SDP (3) TQPACK048SD
M37515T-PTC
: position of No. 1 pin
Be sure to match the position of
No. 1 pin of the foot pattern and
each part.
M37515T-RPD
64LCC-DMS
(1) For debugging (2) For board-mounted
evaluation
4
(48-pin 0.5mm
pitch LQFP)
Item Description
Package
Insertion/removal
iterations of
connector
20 times guaranteed
PLQP0048KB-A (formerly: 48P6Q-A)
 previous next