Filter
Top Products
( 4 / 12 )
* Power cannot be supplied from the emulation pod for PC4701 (e.g. M38000TL2-FPD). A
separate power supply is needed.
1. Things to Check When Unpacking
The M37531T-ADS package consists of the following products. When unpacking your package,
check to see that all of these components are included.
Table 1.1 Package components
* If you find any item missing or faulty, or any suggestion, contact your local distributor.
2. Outline
The M37531T-ADS is a temporary target board used to develop software with a PC4701 emulator
system. It supplies to the emulator MCU the minimum required signals needed to operate the 7531/
7532/7534/7536/7540/7542/7544 Group RSS MCUs, including power supply voltage, clock signals
and reset signals. Use it when the target system is not ready.
3. Specifications
Table 3.1 lists specifications of the M37531T-ADS.
Table 3.1 Specifications of the M37531T-ADS
M37531T-ADS
M37531T-ADS User's manual (this manual)
Temporary target board
User's manual
Applicable MCU
Clock
Vcc
Vss
RESET
External dimensions Width
Depth
Others
M37531RSS
M37532RSS
M37534RSS
M37536RSS
M37540RSS
M37542RSS
M37544RSS
4.0MHz oscillator mounted (oscillator circuit board OSC-2 used)
Supplied separately*
Supplied separately*
• Reset circuit mounted (power-on reset and reset switch)
• Connects the reset output of an emulation pod
90 mm
115 mm
• Pattern for CR oscillator prepared
• Universal part prepared