Filter
Top Products
Operational Specifications
3.3.2 FWE Pin Select Jumper (JP2)
Rev.1.0 July 21, 2006 3-14
REJ10J0952-0100
3
3.3.2 FWE Pin Select Jumper (JP2)
The JP2 allows the connection for the FWE/ASEBRK
________________
/ASEBRKAK
_____________________
pin to be selected.
Figure 3.3.3 shows the FWE pin select jumper (JP2) assignment.
Table 3.3.2 lists the jumper setting for selecting FWE pin (JP2).
Top view of the
component side
Board
edge
Board
edge
1
3
JP2 FWESEL
Figure 3.3.3 FWE Pin Select Jumper (JP2) Assignment
Table 3.3.2 Jumper Setting for Selecting FWE pin (JP2)
Jumper Setting Function
1 - 2 The FWE pin of SH7125 is connected with H-UDI connector (J1). JP2
FWESEL
2 - 3 The FWE pin of SH7125 is connected with DIP switch (SW4-1).
: Initial Setting
Note : Do not change jumper settings while the operation of M3A-HS25. Ensure to turn off the power for the
M3A-HS25 before changing jumper settings.