Filter
Top Products
( 2 / 4 )
1. Outline
The M3T-100LCC-80QSB is a converter board for con-
necting 100-pin 0.65-mm-pitch LCC (100D0) to 80-pin
0.65-mm-pitch QFP (80P6S-A). This board converts a 100-
pin LCC package of M16C/60 Series MCUs to a foot
pattern for 80-pin QFP.
2. Package Components (See Figure 1)
(1) M3T-100LCC-80QSB ............................................. x1
(2) TQSOCKET80SBG
(made by Tokyo Eletech Corporation) ......
x1
(3) TQPACK80SB (made by Tokyo Eletech Corporation) ........ x1
(4) M3T-100LCC-80QSB User's Manual (This manual)
3. Specifications
Table 1 Specifications
4. Usage (See Figure 2)
The M3T-100LCC-80QSB can be used for debugging and
onboard evaluation in common.
(1) For debugging
Mount the TQPACK80SB on the foot pattern of the
target system. And mount the TQSOCKET80SBG and
M3T-100LCC-80QSB on it. Then attach the cable of the
emulator to the IC socket on the M3T-100LCC-80QSB.
(2) For onboard evaluation
Mount an MCU with EPROM (100D0) on the IC socket
on the M3T-100LCC-80QSB.
Before using the M3T-100LCC-80QSB, be sure to read "7.
Precautions" on page 4.
Figure 2 Usage of the M3T-100LCC-80QSB
Figure 1 Package components of the M3T-100LCC-80QSB
Applicable package
Insertion/removal
iterations of IC socket
80P6S-A
(80-pin 0.65-mm-pitch QFP)
20 times guaranteed
(1) M3T-100LCC-80QSB main unit
(2) TQSOCKET80SBG
(3) TQPACK80SB