Renesas M3T-DUMMY64 Computer Hardware User Manual


  Open as PDF
of 4
 
( 4 / 4 )
8. Precautions
CAUTION
Cautions to Be Taken for This Product:
•Do not solder the M3T-DUMMY64 main unit directly on a target board. Be sure to use the included socket.
• Before mounting the M3T-DUMMY64, be sure to check the pin positions.
• Holder patterns are required at each of the four corners of the target foot pattern. (see Figure 4).
• Be sure to solder the holders of the socket. An insufficient amount of solder applied to the holders may
cause a poor contact, so be careful.
• For soldering the socket and mounting the M3T-DUMMY64, refer to the supplementary document
"Mounting the Socket Included with the M3T-DUMMY64" and "Notes on Handling the M3T-
DUMMY64".
• Do not apply an unnecessary stress to the M3T-DUMMY64.
• Do not touch the pins of the M3T-DUMMY64.
•Store the M3T-DUMMY64 in the dedicated case.
9. Correspondence of Connectors J1, J2
Table 2 Correspondence of the connectors
(NC: No connection)
J1-1 NC J1-21 NC J2-1 NC J2-21 NC
J1-2 NC J1-22 NC J2-2 NC J2-22 NC
J1-3 49 J1-23 33 J2-3 1 J2-23 17
J1-4 50 J1-24 34 J2-4 2 J2-24 18
J1-5 51 J1-25 35 J2-5 3 J2-25 19
J1-6 52 J1-26 36 J2-6 4 J2-26 20
J1-7 53 J1-27 37 J2-7 5 J2-27 21
J1-8 54 J1-28 38 J2-8 6 J2-28 22
J1-9 55 J1-29 39 J2-9 7 J2-29 23
J1-10 56 J1-30 40 J2-10 8 J2-30 24
J1-11 25 J1-31 41 J2-11 9 J2-31 57
J1-12 26 J1-32 42 J2-12 10 J2-32 58
J1-13 27 J1-33 43 J2-13 11 J2-33 59
J1-14 28 J1-34 44 J2-14 12 J2-34 60
J1-15 29 J1-35 45 J2-15 13 J2-35 61
J1-16 30 J1-36 46 J2-16 14 J2-36 62
J1-17 31 J1-37 47 J2-17 15 J2-37 63
J1-18 32 J1-38 48 J2-18 16 J2-38 64
J1-19 NC J1-39 NC J2-19 NC J2-39 NC
J1-20 NC J1-40 NC J2-20 NC J2-40 NC
Pin No. of
connector
Pin No. of
M3T-DUMMY64
Pin No. of
connector
Pin No. of
M3T-DUMMY64
Pin No. of
connector
Pin No. of
M3T-DUMMY64
Pin No. of
connector
Pin No. of
M3T-DUMMY64
IMPORTANT
Notes on This Product:
•We cannot accept any request for repair.
• To remove the socket frame, use the dedicated tool AXY8564R1 made by Matsushita Electric Works,
Ltd. To purchase this product and the socket frame for repair, contact Matsushita Electric Works, Ltd.
(http://www.mew.co.jp/e-index.html)
• For inquiries about this product or the contents of this manual, contact your local distributor.
Renesas Tools Homepage http://www.renesas.com/en/tools
 previous