Filter
Top Products
( 2 / 4 )
1. Outline
The M3T-FLX-100NSE is a converter board for connecting
the 100-core flexible cable FLX100 to a foot pattern for 100-
pin 0.4-mm-pitch TQFP (100PFB-A).
2. Package Components (See Figure 1)
(1) M3T-FLX-100NSE converter board ....................... 1
(2) YQPACK100SE (made by Tokyo Eletech Corporation) ...... 1
(3) NQPACK100SE (made by Tokyo Eletech Corporation) ...... 1
(4) YQ-GUIDE's............................................................4
(5) M3T-FLX-100NSE User's Manual (this manual)
3. Specifications
Table 1 Specifications
4. Usage (See Figure 2)
The M3T-FLX-100NSE can be used for debugging and
onboard evaluation in common by mounting the
NQPACK100SE on the target system.
(1) For debugging
Mount the NQPACK100SE on the foot pattern of the
target system and attach the YQPACK100SE on it. And
connect the probe of the emulation pod to the upper
connectors of the M3T-FLX-100NSE. Then connect the
YQPACK100SE and the M3T-FLX-100NSE.
(2) For onboard evaluation
Mount an MCU with on-chip flash memory or one-time
PROM and the HQPACK100SE (separately available)
in that order on the NQPACK100SE on the target system.
Before using the M3T-FLX-100NSE, be sure to read "7.
Precautions" on page 4.
Figure 1 Package components
Figure 2 Usage
M3T-FLX-100NSE
YQ-GUIDE's (x4)
YQPACK100SE
NQPACK100SE
Applicable package
Insertion/removal iterations of connector
100PFB-A (100-pin 0.4-mm-pitch TQFP)
20 times guaranteed
(1) For debugging
(2) For onboard evaluation
FLX100
M3T-FLX-100NSE
YQ-GUIDE's (x4)
YQPACK100SE
NQPACK100SE
100-pin 0.4-mm-pitch
(100PFB-A) foot pattern
MCU with on-chip flash
memory or one-time PROM
HQPACK100SE
(separately available)
: Position of No. 1 pin
Be sure to align the pins.