Filter
Top Products
1. Outline
This accessory tool connects the probe of an emulation pod
and the target. Its dimensions are the same as those of the
MCU for the 42-pin 0.8-mm-pitch SSOP (17.5 x 8.4 mm) IC
package (42P2R-A).
2. Package Components
(1) M3T-SSOP42B-450 main unit ..... x1
(2) Socket............................................ x1
(3) Socket frame (for 42P2R-A) ......... x2
(4) M3T-SSOP42B-450 User's Manual (This manual)
3. Applicable Socket
As this product is evaluated in combination with IC sockets
made by Matsushita Electric Works, Ltd., be sure to use the
sockets specified below.
Socket + socket frames (5 pieces)
AXS69204201 made by Matsushita Electric Works, Ltd.
Socket frame for repair (one piece)
AXS69304201 made by Matsushita Electric Works, Ltd.
4. Specifications
Table 1 Specifications
5. Usage
The M3T-SSOP42B-450 can be used for debugging and
board mounted evaluation in common by mounting the
socket directly on the target board.
(1) For debugging
Mount the socket directly to the foot pattern on the target
board. On top if it, mount the M3T-SSOP42B-450 and
socket frame in that order. Then connect the pod probe of
the emulation pod, etc. to the connector provided at the top
of the M3T-SSOP42B-450.
(2) For board-mounted evaluation
Mount an MCU with on-chip flash memory or one-time
PROM and socket frame in that order to the socket on the
target system.
Before using the M3T-SSOP42B-450, be sure to read "8.
Precautions" on page 4.
Figure 1 Package components of the M3T-SSOP42B-450
Figure 2 Usage of the M3T-SSOP42B-450
(1) M3T-SSOP42B-450
(2) Socket (3) Socket frame
( 2 / 4 )
Applicable package
42P2R-A
(42-pin 0.8-mm-pitch SSOP)
Insertion/removal
iteration of connector
50 times guaranteed
: Position of No. 1 pin
Be sure to align No. 1 pin.