Filter
Top Products
7
Fasten the user system interface board to the IC socket for a PRQP0064GB-A (former code:
FP-64AV) package on the user system with the four screws (M2.0
x 10 mm) provided. Each
screw should be tightened a little at a time, alternating between screws on opposing corners. Take
special care, such as manually securing the IC socket soldered area, to prevent the soldered IC
socket from being damaged by overtightening the screws or twisting the components.
Board
Screws (M2.0 x 10 mm)
User system
IC socket
(NQPACK064SA manufactured by
Tokyo Teletech Corporation)
Pin 1
Figure 2 Connecting User System Interface Board to User System