Filter
Top Products
1. Outline
The R0E53032ACSJC0 is a converter board for connecting the
signals of the MCU unit R0E521300MCU00 for R8C/Tiny
Series to a foot pattern for 20-pin 0.65mm pitch LSSOP of
R8C/32A group.
2. Package Components (See Figure 1)
Check to see if the R0E53032ACSJC0 package has all the
following contents before using this product.
(1) R0E53032ACSJC0 converter board............................ 1 pc.
(2) YSPACK20BG
(made by Tokyo Eletech Corporation)............ 1 pc.
(3) NSPACK20BG
(made by Tokyo Eletech Corporation) .......... 1 pc.
(4) YS–GUIDE
(made by Tokyo Eletech Corporation) ...............2 pcs.
(5) R0E53032ACSJC0 User's Manual (this manual)
3. Specifications
Table 1 Specifications
Applicable package
PLSP0020JB-A:
formerly 20P2F-A
(20-pin 0.65mm pitch LSSOP)
Insertion/removal
iterations of connector
50 times
guaranteed
4. Usage (See Figure 2)
The R0E53032ACSJC0 can be used for debugging and
on-board evaluation in common by mounting the
NSPACK20BG on the user system.
(1) For debugging
Mount the NSPACK20BG on the foot pattern of the user
system and attach the YSPACK20BG on it. In addition,
connect the R0E53032ACSJC0 to the YSPACK20BG,
and then connect the flexible cable R0E001000FLX10 of
the emulator to the upper connector of the
R0E53032ACSJC0.
(2) For on-board evaluation
Mount an MCU with on-chip flash memory or one-time
PROM and the HSPACK20BG (not included) in order on
the NSPACK20BG on the user system.
Before using the R0E53032ACSJC0, be sure to read "7.
Precautions" on page 4.
R053032ACSJC0
YS-GUIDE (×2)
YSPACK20BG
NSPACK20BG
Figure 1 Package components of the R0E53032ACSJC0
Figure 2 Usage of the R0E53032ACSJC0
(2/4)