Filter
Top Products
(2/4)
1. Outline
The R0E53033ACFG90 is a converter board for connecting the
signals of the MCU unit R0E521300MCU00 for R8C/Tiny
Series to a foot pattern for 32-pin 0.8mm pitch LQFP of
R8C/33A group.
2. Package Components (See Figure 1)
Check to see if the R0E53033ACFG90 package has all the
following contents before using this product.
(1) R0E53033ACFG90 converter board........................... 1 pc.
(2) YQPACK032SA
(made by Tokyo Eletech Corporation).......... 1 pc.
(3) NQPACK032SA
(made by Tokyo Eletech Corporation) ........ 1 pc.
(4) YQ-GUIDE
(made by Tokyo Eletech Corporation) ...............4 pcs.
(5) R0E53033ACFG90 User's Manual (this manual)
3. Specifications
Table 1 Specifications
Applicable package
PLQP0032GB-A:
formerly 32P6U-A
(32-pin 0.8mm pitch LQFP)
Insertion/removal
iterations of connector
50 times guaranteed
4. Usage (See Figure 2)
The R0E53033ACFG90 can be used for debugging and
on-board evaluation in common by mounting the
NQPACK032SA on the user system.
(1) For debugging
Mount the NQPACK032SA on the foot pattern of the user
system and attach the YQPACK032SA on it. In addition,
connect the R0E53033ACFG90 to the YQPACK032SA,
and then connect the flexible cable R0E001000FLX10 of
the emulator to the upper connector of the
R0E53033ACFG90.
(2) For on-board evaluation
Mount an MCU with on-chip flash memory or one-time
PROM and the HQPACK032SA (not included) in order
on the NQPACK032SA on the user system.
Before using the R0E53033ACFG90, be sure to read "7.
Precautions" on page 4.
R0E53033ACFG90
YQ-GUIDE (×4)
YQPACK032SA
NQPACK032SA
Figure 1 Package components of the R0E53033ACFG90
●: No.1 pin
Be sure to align the pins.
FLASH MCU, etc.
HQPACK032SA
(not included)
(2) For on-board
evaluation
(1) For debugging
YQPACK032SA
YQ-GUIDE (×4)
NQPACK032SA
32-pin 0.8mm pitch
foot pattern
R0E53033ACFG90
Flexible cable
R0E001000FLX10
Figure 2 Usage of the R0E53033ACFG90