Filter
Top Products
(2/4)
1. Outline
The R0E53034ECFK60 is a converter board for connecting the
signals of the MCU unit R0E521300MCU00 for R8C/Tiny
Series to a foot pattern for 48-pin 0.5mm pitch LQFP of
R8C/34E, R8C/34F, R8C/34G and R8C/34H groups.
2. Package Components (See Figure 1)
Check to see if the R0E53034ECFK60 package has all the
following contents before using this product.
(1) R0E53034ECFK60 converter board............................ 1 pc.
(2) YQPACK048SD
(made by Tokyo Eletech Corporation).......... 1 pc.
(3) NQPACK048SD
(made by Tokyo Eletech Corporation) ........ 1 pc.
(4) YQ-GUIDE
(made by Tokyo Eletech Corporation) ...............4 pcs.
(5) R0E53034ECFK60 User's Manual (this manual)
3. Specifications
Table 1 Specifications
Applicable package
PLQP0048KB-A:
formerly 48P6Q-A
(48-pin 0.5mm pitch LQFP)
Insertion/removal
iterations of connector
50 times guaranteed
4. Usage (See Figure 2)
The R0E53034ECFK60 can be used for debugging and
on-board evaluation in common by mounting the
NQPACK048SD on the user system.
(1) For debugging
Mount the NQPACK048SD on the foot pattern of the user
system and attach the YQPACK048SD on it. In addition,
connect the R0E53034ECFK60 to the YQPACK048SD,
and then connect the flexible cable R0E001000FLX10 of
the emulator to the upper connector of the
R0E53034ECFK60.
(2) For on-board evaluation
Mount an MCU with on-chip flash memory or one-time
PROM and the HQPACK048SD (not included) in order
on the NQPACK048SD on the user system.
Before using the R0E53034ECFK60, be sure to read "7.
Precautions" on page 4.
R0E53034ECFK60
YQ-GUIDE (×4)
YQPACK048SD
NQPACK048SD
Figure 1 Package components of the R0E53034ECFK60
●: No.1 pin
Be sure to align the pins.
FLASH MCU, etc.
HQPACK048SD
(not included)
(2) For on-board
evaluation
(1) For debugging
YQPACK048SD
YQ-GUIDE (×4)
NQPACK048SD
48-pin 0.5mm pitch
foot pattern
R0E53034ECFK60
Flexible cable
R0E001000FLX10
Figure 2 Usage of the R0E53034ECFK60