Filter
Top Products
(2/4)
1. Outline
The R0E53038ACFK30 is a converter board for connecting the
signals of the MCU unit R0E521300MCU00 for R8C/Tiny
Series to a foot pattern for 80-pin 0.5mm pitch LQFP of
R8C/38E, R8C/38F, R8C/38G and R8C/38H Groups.
2. Package Components (See Figure 1)
Check to see if the R0E53038ACFK30 package has all the
following contents before using this product.
(1) R0E53038ACFK30 converter board........................... 1 pc.
(2) YQPACK080SD
(made by Tokyo Eletech Corporation).......... 1 pc.
(3) NQPACK080SD-ND
(made by Tokyo Eletech Corporation)... 1 pc.
(4) YQ-GUIDE
(made by Tokyo Eletech Corporation) ...............4 pcs.
(5) R0E53038ACFK30 User's Manual (this manual)
3. Specifications
Table 1 Specifications
Applicable package
PLQP0080KB-A:
formerly 80P6Q-A
(80-pin 0.5mm pitch LQFP)
Insertion/removal
iterations of connector
50 times guaranteed
4. Usage (See Figure 2)
The R0E53038ACFK30 can be used for debugging and
on-board evaluation in common by mounting the
NQPACK080SD-ND on the user system.
(1) For debugging
Mount the NQPACK080SD-ND on the foot pattern of the
user system and attach the YQPACK080SD on it. In
addition, connect the R0E53038ACFK30 to the
YQPACK080SD, and then connect the flexible cable
R0E001000FLX10 of the emulator to the upper connector
of the R0E53038ACFK30.
(2) For on-board evaluation
Mount an MCU with on-chip flash memory or one-time
PROM and the HQPACK080SD (not included) in order
on the NQPACK080SD-ND on the user system.
Before using the R0E53038ACFK30, be sure to read "7.
Precautions" on page 4.
R053038ACFK30
YQ-GUIDE (×4)
YQPACK080SD
NQPACK080SD-ND
Figure 1 Package components of the R0E53038ACFK30
Figure 2 Usage of the R0E53038ACFK30