Filter
Top Products
1. Outline
The R0E530650CFJ30 is a converter board for connecting the
flexible cable R0E001000FLX10 to a foot pattern for 80-pin
0.65mm pitch LQFP (PLQP0080JA-A).
2. Package Components (See Figure 1)
Check to see if the R0E530650CFJ30 package has all the
following contents before using this product.
(1) R0E530650CFJ30 converter board ............................. 1 pc.
(2) YQPACK080SB
(made by Tokyo Eletech Corporation) ................ 1 pc.
(3) NQPACK080SB
(made by Tokyo Eletech Corporation) .............. 1 pc.
(4) YQ-GUIDE
(made by Tokyo Eletech Corporation) .....................4 pcs.
(5) R0E530650CFJ30 User's Manual (this manual)
3. Specifications
Table 1 Specifications
Applicable package
PLQP0080JA-A
(80-pin 0.65mm pitch LQFP)
Insertion/removal
iterations of connector
50 times
guaranteed
4. Usage (See Figure 2)
The R0E530650CFJ30 can be used for debugging and on-board
evaluation in common by mounting the NQPACK080SB on the
user system.
(1) For debugging
Mount the NQPACK080SB on the foot pattern of the user
system and attach the YQPACK080SB on it. In addition,
connect the R0E530650CFJ30 to the YQPACK080SB,
and then connect the flexible cable R0E001000FLX10 of
the emulator to the upper connector of the
R0E530650CFJ30.
(2) For on-board evaluation
Mount an MCU with on-chip flash memory or one-time
PROM and the HQPACK080SB (not included) in order
on the NQPACK080SB on the user system.
Before using the R0E530650CFJ30, be sure to read "7.
Precautions" on page 4.
R0E530650CFJ30
converter board
YQ-GUIDE (×4)
YQPACK080SB
NQPACK080SB
Figure 1 Package components of the R0E530650CFJ30
80-pin 0.65mm pitch
(PLQP0080JA-A) foot pattern
FLASH MCU, etc.
(2)For on-board
evaluation
YQPACK080SB
NQPACK080SB
YQ-GUIDE(×4)
HQPACK080SB
(not included)
R0E530650CFJ30
(1)For debugging
●:No.1 pin
Be sure to align the pins.
Flexible cable
R0E001000FLX10
Figure 2 Usage of the R0E530650CFJ30
(2/4)