Filter
Top Products
1. Outline
The R0E530650CFK10 is a converter board for connecting the
flexible cable R0E001000FLX10 to a foot pattern for 128-pin
0.5mm pitch LQFP (PLQP0128KB-A).
2. Package Components (See Figure 1)
Check to see if the R0E530650CFK10 package has all the
following contents before using this product.
(1) R0E530650CFK10 converter board............................ 1 pc.
(2) YQPACK128RD
(made by Tokyo Eletech Corporation)................ 1 pc.
(3) NQPACK128RD
(made by Tokyo Eletech Corporation) .............. 1 pc.
(4) YQ-GUIDE
(made by Tokyo Eletech Corporation) .....................4 pcs.
(5) R0E530650CFK10 User's Manual (this manual)
3. Specifications
Table 1 Specifications
Applicable package
PLQP0128KB-A:
formerly 128P6Q-A
(128-pin 0.5mm pitch LQFP)
Insertion/removal
iterations of connector
50 times
guaranteed
4. Usage (See Figure 2)
The R0E530650CFK10 can be used for debugging and
on-board evaluation in common by mounting the
NQPACK128RD on the user system.
(1) For debugging
Mount the NQPACK128RD on the foot pattern of the user
system and attach the YQPACK128RD on it. In addition,
connect the R0E530650CFK10 to the YQPACK128RD,
and then connect the flexible cable R0E001000FLX10 of
the emulator to the upper connector of the
R0E530650CFK10.
(2) For on-board evaluation
Mount an MCU with on-chip flash memory or one-time
PROM and the HQPACK128RD (not included) in order
on the NQPACK128RD on the user system.
Before using the R0E530650CFK10, be sure to read "7.
Precautions" on page 4.
R0E530650CFK10
converter board
YQ-GUIDE (×4)
YQPACK128RD
NQPACK128RD
Figure 1 Package components of the R0E530650CFK10
●:No.1 pin
Be sure to align the pins.
128-pin 0.5mm pitch
(PLQP0128KB-A) foot pattern
FLASH MCU, etc.
YQPACK128RD
NQPACK128RD
YQ-GUIDE(×4)
HQPACK128RD
(not included)
R0E530650CFK10
Flexible cable
R0E001000FLX10
(1) For debugging
(2) For on-board
evaluation
Figure 2 Usage of the R0E530650CFK10
(2/4)