Filter
Top Products
11
Fasten the user system interface board to the IC socket for a PLQP0144KA-A (FP-144LV)
package on the user system with the four screws (M2.0
x 10 mm) provided. Each screw should be
tightened a little at a time, alternating between screws on opposing corners. Take special care,
such as manually securing the IC socket soldered area, to prevent the soldered IC socket from
being damaged by overtightening the screws or twisting the components.
Board
Screws (M2.0 x 10 mm)
User system
IC socket
(NQPACK144SD-ND manufactured by
Tokyo Eletech Corporation)
Pin 1
Figure 4 Connecting User System Interface Board to User System