Filter
Top Products
M300/ M301 Re:connect
4
Video switch principle
Essentially, the M300/ M301
video switch is a set of external
connections where different
video output and different
recording devices can be
connected.
Connecting a video switch adds
an additional 6 video sources
(Video 1...6) to the M51 Source
menu.
These additional video sources
appear automatically in the M51
Source menu. If you want to be
able to call them with the
remote control, the Remote
menu must be modified (see the
Remote section in the
Introduction chapter).
The M51 then takes over the
complete control of the video
switch.
The figure below shows how the
different audio and video signals
find their way to the individual
devices.
Additionally; you have the
option of recording audio and
video signals with the video
sources 1 and 2 (shown below
by the arrows), e.g. using a
video recorder or video server.
Video switch basic function