Filter
Top Products
5.1 Decoder Module 3 Re:source
22
Setting the levels on passive
speakers
The signal from each individual
speaker can be heard for about
3 seconds. During this time, you
can set the optimum volume in
a range of ± 10 dB, using the
rotary volume control or the
remote control.
The activated speaker is shown
dark.
The goal
The aim of this exercise is that
the sound should be experienced
at the same intensity from each
speaker. This guarantees that
effects, dialogue or music
reaches the ear in the correct
relationship.
This procedure continues until
you press the Noise softkey
again.
.!. Subwoofer level .!.
The basic subwoofer volume
setting is not defined through
the Noise menu, as there are
very different recording levels,
particularly in the case of DVDs,
which often require an individual
adjustment.
This adjustment can be carried
out simply and comfortably in
the normal amplifier menu. You
can reach this directly through
the Amplifier key on the M51 or
using the remote control.
Please refer to the Chapter
level setting on page 13.