Ricoh 8080 All in One Printer User Manual


 
Network Settings
15
1
Note
As to [Effective Protocol], check if the protocol to use is set as [Active].
[IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter-
face board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the selected interface takes precedence.
Reference
p.49 “Interface Settings”
p.56 “File Transfer”
Settings Required to Use Internet Fax
This section lists the settings required for using Internet Fax.
Ethernet
This section lists the settings required for using Internet Fax with an Ethernet
connection.
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.
Interface Settings/Network
Host Name As required
Interface Settings/Network
Machine Name As required
Interface Settings/IEEE 802.11b
Communication Mode Necessary
Interface Settings/IEEE 802.11b
SSID Setting As required
Interface Settings/IEEE 802.11b
Channel As required
Interface Settings/IEEE 802.11b
Security Method As required
Interface Settings/IEEE 802.11b
Transmission Speed As required
Menu User Tool Setting Requirements
Interface Settings/Network
Machine IPv4 Address Necessary
Interface Settings/Network
IPv4 Gateway Address Necessary
Interface Settings/Network
DNS Configuration As required
Interface Settings/Network
DDNS Configuration As required
Interface Settings/Network
Domain Name As required
Interface Settings/Network
WINS Configuration As required
Interface Settings/Network
Effective Protocol Necessary
Interface Settings/Network
Ethernet Speed As required
Interface Settings/Network
LAN Type Necessary
Interface Settings/Network
Permit SNMPv3 Communication As required
Heading Setting Item Setting Requirements