Ricoh DSC428 All in One Printer User Manual


 
Copying
28
2
Colour Functions
Selecting a Colour Mode
Select a Colour mode that best suits
your originals and copying require-
ments.
Reference
For colour images, see p.iii What
You Can Do with This Machine
<Colour Functions/Colour Ad-
justments>
The following basic functions are ex-
plained in this section.
Auto Colour Selection
Judges the colour of the original
automatically, and copies either in
full colour or black/white.
Full Colour Copy
Copies by overlaying yellow, ma-
genta, cyan, and black.
Black/White Copy
Copies in black regardless of the
colour of the original.
Single Colour Copy
Copies in one designated colour.
Note
Yellow, magenta, and cyan will
be copied with one toner colour,
but beige, orange, red, light
green, pink, green, marine blue,
blue and purple uses 2 toner
colours to copy.
Two Colour Copy
Two Colour Copy (Normal)
Copies black and other parts in
two specified colours.
Note
You can select from basic col-
ours and registered colours.
Two Colour Copy (Red & Black)
Copies the red part in red, and
all the other parts in black or
white.
Note
When the width of the colour
is set to Wider, colours
close to orange and purple
will be recognized as red.
This adjustment will be valid
in Erase Colour and Con-
vert Colours. See p.123
Colour Sensitivity
A
AA
A
Select the type of colour key.
When the {
{{
{Single Colour}
}}
} key is
selected
A
AA
A
Select designation method of col-
our ( [Basic Colour], [User Colour] ).
B
BB
B
Select the colour, and then press
[OK].
AFZ026S
JupiterC2_GB_Copy_F_FM.book Page 28 Friday, January 20, 2006 7:37 PM