Filter
Top Products
2
❖
Do not pull the paper out until it has been stapled. If you do, the paper may misfeed.
If a paper misfeed occurs, check the error message on the printer's display
panel, and then remove the paper.
Reference
For information about dealing with paper misfeeds, see Maintenance
Guide 2 that comes with the printer.
Note
❒ The reprinting operation after dealing with an error depends on the paper
misfeed location.
• When "Remove Misfeed R: Finisher " appears, printing restarts from the
first page of the document being printed or the page of the document
being printed when the misfeed occurred.
• When "Remove Misfeed A:Internal Path" appears, printing restarts
from the page of the document being printed when the misfeed oc-
curred.
❒ Even if the paper misfeed occurred in the Internal Path, the error message
may not disappear unless the covers of the Finisher are opened and then
closed.
❖
Staple printing is cancelled in the following cases:
• You set more sheets than can be stapled
The maximum number of sheets that can be stapled is 30.
• You select a paper size that cannot be stapled
The paper sizes that can be stapled are A3 (11.69×16.54) , B4
(10.12×14.33) , A4/letter , A4/letter , B5 (10.12×7.17) , 11×17 , Le-
gal , Executive , Foolscap , 8K , and 16K .
• You select a paper type that cannot be stapled
The paper types that can be stapled are "Plain Paper" and "Recycled Pa-
per". ("Labels", "Thick Paper", and "Transparency" paper types cannot be
stapled.)
• You set staple positions other than the specified staple positions
• The binding positions and the staple positions are inconsistent when per-
forming duplex printing
• A different paper size is set in the middle of a job so that a mixture of paper
sizes is output
• Output is not directed to the Finisher Tray
• The staples have run out
Note
❒ If staple printing is cancelled, "Staple Cancelled" appears on the printer's
panel display.
Copyright©2001
G071-7880
UE USA
EE GB