Ricoh SP 112 Printer User Manual


 
6. Alert Indicator
This indicator lights up red when the machine runs out of paper or consumables, when the paper settings do
not match the settings specified by the driver, or when other errors occur.
7. Tray Extension
Pull out and extend this tray extension to hold the output paper.
8.
Fusing Pressure Release Lever
If paper is jammed, lower the lever on the left end, and then remove the paper.
9. Front Cover
Open this cover to pull out the output tray before printing.
10. USB Port
Use this port to connect the machine to a computer using a USB cable.
11. Input Tray Cover
Set this cover up and pull out the paper source tray to load paper.
12. Power Connector
Connect the power cord to the machine here. Insert the other end of the cable into a nearby wall outlet.
13. Power Switch
Use this switch to turn the power on or off.
Interior
1
CXP043
1. Print Cartridge
A replacement consumable that is required to make prints on paper. For details about replacing the cartridge,
see page 33 "Replacing the Print Cartridge".
1. Guide to the Machine
10