Filter
Top Products
© 2007 Buyers Laboratory Inc. WARNING: This material is copyrighted by Buyers Laboratory Inc. and is the sole property of Buyers Laboratory. Duplication of this proprietary report or excerpts from this report, in any man-
ner, whether printed or electronic (including, but not limited to, copying, faxing, scanning or use on a fax-back system), is illegal and strictly forbidden without written permission from Buyers Laboratory. Violators will be pros-
ecuted to the fullest extent of the law. To purchase reprints of any BLI reports or articles, contact BLI at (201) 488-0404. Buyers Laboratory Inc., 20 Railroad Avenue, Hackensack, NJ 07601. Contact us at info@buyerslab.com.
12
LAB TEST
Ricoh Aficio SP 4100N
Buyers LaBoratory Lab TesT RepoRT
© 2007 Buyers Laboratory Inc. WARNING: This material is copyrighted by Buyers Laboratory Inc. and is the sole property of Buyers Laboratory. Duplication of this proprietary report or excerpts from this report, in any man-
ner, whether printed or electronic (including, but not limited to, copying, faxing, scanning or use on a fax-back system), is illegal and strictly forbidden without written permission from Buyers Laboratory. Violators will be pros-
ecuted to the fullest extent of the law. To purchase reprints of any BLI reports or articles, contact BLI at (201) 488-0404. Buyers Laboratory Inc., 20 Railroad Avenue, Hackensack, NJ 07601. Contact us at info@buyerslab.com.
13
LAB TEST
Ricoh Aficio SP 4100N
Buyers LaBoratory Lab TesT RepoRT
Send once/print many:
Although there is a collate selection in the driver, it did not
function in testing. For output to be properly collated, the
collate selection must be made from the Windows print screen
within an application; doing so, however, does not increase
le size.
Text Excellent
Line art Very Good
Halftone range Fair
Halftone ll Good
Solids Excellent
Black density:
1.35 to 1.37.
Density for units in this class tested to date:
1.00 to 1.94.
Measurements are based on four readings corresponding to four different
solid black locations on the output. The higher the density reading, the
darker the image.
Halftone range:
Grayscale is clearly visible from the 3% to 88% dot-ll levels,
with consistent toner coverage within levels, though not all
transitions between levels were distinct.
Typical halftone range for monochrome laser/LED printers:
3% to 90%.
IMAGE QUALITY
0 1.00.5
SP 4100N
Print density
21.5
Range for
tested units
This report has been reproduced with the written permission of Buyers Laboratory Inc. Any duplication of this report, in whole or part, in any form or manner,
without the written permission of Buyers Laboratory, is unlawful and violators will be prosecuted. © 2007 Buyers Laboratory Inc. To purchase reprints,
contact BLI at (201) 488-0404 (x17) or at info@buyerslab.com.