Filter
Top Products
Getting Started
18
1
Setting OHP transparencies
Note
❒ For colour printing, do not use
OHP transparencies that have eas-
ily melted surface.
❒ Insert OHP transparencies in the
K direction.
❒ We recommend that you use a
4000ANSI lumen or brighter over-
head projector to project OHP
transparencies.
❒ Paper settings can also be set using
the printer driver. The following
procedures are not necessary
when setting paper sizes using the
printer driver.
❒ Paper size settings set using the
printer driver have priority over
those set using the machine's dis-
play panel.
❒ When the printer driver is not
used, make settings using the dis-
play panel.
Reference
For printer driver settings, see the
printer driver Help.
A
AA
A
Press the {
{{
{User Tools/Counter}
}}
} key
on the control panel.
B
BB
B
Press [System Settings].
C
CC
C
Press the [Tray Paper Settings] tab.
D
DD
D
Press [T
TT
TNext] to scroll through the
list.
E
EE
E
Press [Paper Type: Bypass Tray].
F
FF
F
Select [OHP] or [Translucent].
G
GG
G
Press [OK].
The paper type selected is dis-
played.
H
HH
H
Press the {
{{
{User Tools/Counter}
}}
} key.
Note
❒ The settings made will remain
valid until they are reset again.
After printing on OHP trans-
parencies or thick paper, make
sure to clear settings for the next
user.
VenusC1GB-Printer-F8_FM.book Page 18 Tuesday, March 29, 2005 4:51 PM