Filter
Top Products
17Alcatel-Lucent | OmniAccess AP
OAW-AP65
• 1 x 10/100 Base-TX (RJ-45) auto-sensing
Ethernet interface
• Auto-sensing MDI/MDX
• PoE 48VDC / 220mA power over Ethernet
(802.3af compliant)
• Supports Serial over Ethernet
• Rear Mounted
• 1 x 5V DC External Power Interface
OAW-AP70
• 2 x 10/100BaseTX RJ-45 auto-sensing
Ethernet interfaces (Port 0)
• Auto-sensing MDI/MDX
• PoE 48V DC / 250mA power over Ethernet
(802.3af compliant)
• Serial over Ethernet (Port 1)
• Auto-sensing MDX
• PoE 48V DC / 250mA power over Ethernet
(802.3af compliant)
• Redundant Ethernet data link and power
over Ethernet
• USB ver2.0 interface
• 1 x 5V DC power interface
OAW-AP80
• 1 x 10/100 Base-TX auto-sensing Ethernet
interface (IP67 8-pin male (pole) M12 circular
DIN connector (Au) contacts)
• Auto-sensing MDI/MDX
• PoE 48V DC / 1.2A (30W) power over
Ethernet (non-standard 802.3af)
• Integral lightning arrester
• 1 x 2.4 Ghz N-Type Female Antenna Interface
• 1 x 5 Ghz N-Type Female Antenna Interface
• 1 x Electrical Ground / Safety Terminal
• 1 x Integral ENET lightening arrester
OAW-AP80
• (Ready) Power on/off (provided on Power injector)
Power Requirements
OAW-AP41
• 48V DC / 200mA power-over-Ethernet
(802.3af compliant)
OAW-AP60
• External AC power or POE
• 5V DC / 2A supplied externally via optional
country specific AC adapter kits
• 48V DC / 200mA power over Ethernet
(802.3af compliant)
OAW-AP65
• External AC power or POE
• 5V DC / 2A supplied externally via optional
country specific AC adapter kits
• 48V DC / 220mA Power-over-Ethernet
(802.3af compliant)
OAW-AP70
• External AC power or POE
• 5V DC / 3A supplied externally via optional
country specific AC adapter kits
• 48V DC / 250mA power over Ethernet
(802.3af compliant)
OAW-AP80
• Access Point power draw - 48V DC / 1.2A
(30W) Power-over-Ethernet (non-standard
802.3af)
• External Power Injector, auto-sensing 100-
240V AC Input, 1.5A Output 48 VDC, 1.2A
(30W) (provided)
Mechanical Interfaces
OAW-AP41 MECHANICAL INTERFACES
• Wall-mount lugs
OAW-AP60 AND AP61 AND OAW-AP70
• Standard Kensington MicroSaver security
cable interface (not supplied)
• Optional wall and ceiling mount kit interface
OAW-AP65
• 1 x Integrated ceiling tile rail snap-in mount
(for 15/16” diameter rails). Located on rear
of device
• 1 x Kensington locking interface
OAW-AP80
• 4 x Mounting Bracket Points
• Ruggedized wall, pole or mast mount
hardware provided (articulating in horizontal
and vertical planes)
Visual Indicators (LEDs)
OAW-AP41
• (Ready) Power on/off/booting
• (ENET) Link status / activity
• (WLAN A) IEEE 802.11a status
• (WLAN G) IEEE 802.11b/g status
OAW-AP60 AND AP61 AND OAW-AP70
• (Ready) Power on/off
• (Ethernet) link status / activity
• (Radio mode) 802.11a and b/g AP /air
monitor mode
OAW-AP65
• (Ready) Power on/off/booting
• (Ethernet 0) link status / activity
• 802.11a + b/g Wireless Access Point
• 802.11a + b/g Wireless Air Monitor