Filter
Top Products
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Listening to the Radio
1. Switch on the radio by pressing the On/Off button . The LED dial
pointer will light up indicating that the radio is switched on.
Note your clock radio will not switch on until the clock has been
set.
2. Select the required waveband using the Waveband selector switch.
3. Tune in to the desired station by rotating the Tuning control. The
station frequency is indicated by the LED dial pointer.
The Wire aerial located on the rear of your clock radio is for FM
reception. The wire should be fully extended and positioned for
optimum reception.
For MW reception there is a built in ferrite aerial. Rotate your clock
radio to the position giving best reception.
4. Adjust the volume by rotating the Volume control.
5. The radio can be switched off by pressing the On/Off button.
540
150
600
170 20 0
700 900
230 260 280
1200 1600
kHz
kHz
MW
LW
FM
88 92 96 100 10610 4 10 8
MHz
540
150
600
170 20 0
700 900
230 260 280
1200 1600
kHz
kHz
MW
LW
FM
88 92 96 100 10610 4 10 8
MHz
On/Off
MW FM
Tuning
Volume
On/Off
8