Filter
Top Products
ENGLISH
11
Pull rapidly
(e) Pull the starter handle slowly until
resistance is felt.
This is the "compression" point.
Return the handle to its original
position and then pull swiftly.
If the engine fails to start after several
attempts, repeat above procedures
with choke lever returned to "OPEN"
position.
Do not fully pull out the rope.
After starting, allow the starter handle
to return to its original position while
still holding the handle.
(f) After the engine started, return the
choke lever gradually to "OPEN"
position.
Choke lever
CLOSE
OPEN
(g) Warm up the engine without a load for
a few minutes.