Filter
Top Products
8
How do I connect the tip to the adapter cable?
Once you have selected the correct tip for your laptop,
connect the tip to the output cable, making sure that the
ridge on the inside of the tip aligns properly with the groove
in the output cable connector. Additionally, the pins on the
inside of the tip should be in line with the holes in the output
cable. The tip should be pushed firmly onto the cable until
the tip and cable meet and there is no gap.
What other laptops can I use this adapter for?
The Rocketfish Universal Power Adapter is compatible with
thousands of laptop models. A complete list of compatible
laptops can be viewed through the Tip Wizard at
www.RocketfishProducts.com.
Why doesn't the tip fit into my laptop?
If the tip does not appear to fit into your laptop you may
have selected the incorrect tip for your device. The tip should
fit snugly inside the DC input jack on the side or back of your
laptop. If the tip will not fit into the jack do not force the tip.
Confirm you have selected the correct tip for your laptop by
referencing the included Tip Compatibility Guide or visiting
the Tip Wizard at www.RocketfishProducts.com. If you need
additional assistance please contact Rocketfish customer
service at (800) 620-2790.
Will using an incorrect tip damage my laptop?
The tips are designed to be used with specific laptops and so
you should only use the tip that is designated specifically for
your laptop. The correct tip can be identified by using the
online Tip Wizard at www.RocketfishProducts.com or by
locating your specific laptop in the included Tip
Compatibility Guide.
RF-BPRAC3 09-0601_ENG.fm Page 8 Wednesday, July 8, 2009 10:16 AM