Filter
Top Products
15
Q&A
Q&A
You can also make the Output Assign settings in the EZ
ROUTING Output Assign screen (
[EZ ROUTING]
→
[F3 (OUTPUT)]
.
14.
Connect each output to the external effects.
Recording the Sounds Output
from the External Effects to the
Tracks
1.
Connect the outputs of the external effects to ANALOG
INPUT 1–8 (if using track direct outs as mentioned
above).
2.
Hold down
[SHIFT]
and press
[EZ ROUTING (PATCH BAY)]
. The display switches to
the Patch Bay screen.
3.
Press [ ] [ ] [ ] [ ] to move the cursor to “INPUT
MIXER 1 2.”
4.
Rotate the TIME/VALUE dial to connect ANALOG
INPUT 1 2. ANALOG INPUT 1 and 2 are input to the
Input Mixer Channels 1 and 2.
5.
In the same way, connect “ANALOG INPUT 3 4” to
“INPUT MIXER 3 4,” “ANALOG INPUT 5 6” to “INPUT
MIXER 5 6,” and “ANALOG INPUT 7 8” to “INPUT
MIXER 7 8.” ANALOG INPUT 3, 4, 5, 6, 7, and 8 are
input to the Input Mixer Channels 3, 4, 5, 6, 7, and 8,
respectively.
6.
Press
[IN 1–12]
.
7.
Hold down
[CLEAR]
and press
[CH EDIT]
for Input
Mixer Channel 1. The level for Input Mixer Channel 1 is
set to 0 dB.
8.
In the same way, set the levels for Inputs 2–8 to 0 dB.
9.
Press
[PLAY]
to play back the project, and confirm that
sound from Inputs 1–8 is being output.
10.
Press
[MASTER EDIT]
.
11.
Hold down
[REC]
and press
[STATUS]
for Input Mixer
Channel 1. Track 1 enters recording standby mode (light
flashing in red).
12.
In the same way, put Tracks 2–8 into recording standby
mode (light flashing in red).
13.
Hold down
[STATUS]
for Input Mixer Channel 1. The
display switches to the Quick Routing screen.
14.
Press
[F4 (AllClr)]
. All track assignments are cleared.
15.
Press
[IN 1–16 (SOLO)]
.
16.
Press
[SELECT]
for Input Mixer Channel 1. Input 1 is
assigned to Track 1.
17.
Press
[STATUS]
for Channel 2.
18.
Press
[SELECT]
for Channel 2. Input 2 is assigned to
Track 2.
19.
In the same way, assign Inputs 3, 4, 5, 6, 7, and 8 to
Tracks 3, 4, 5, 6, 7, and 8, respectively.
20.
Press
[HOME]
. The VS-2400CD switches to Home
condition.
21.
Press
[REC]
. The VS-2400CD enters recording standby
mode.
22.
Press
[PLAY]
. Recording begins.
23.
Press
[STOP]
. Recording stops.
2400_app_e.book 15 ページ ２００５年４月２８日 木曜日 午後１時１４分