Rolls RPM26 Network Card User Manual


  Open as PDF
of 2
 
INTRODUCTION
Thank you for your purchase of the ROLLS RPM26 Rack Power Module. The
RPM26 is a single rack space power distibution unit with eight rear-panel AC
outlets, and an individually switched outlet on the front panel. The RPM26 fea-
tures front-panel lighting in the form of brilliant white LED light. A Dimmer control
adjusts the brightness of the LEDS. Because of the low voltage and high efficien-
cy of these LEDs, they will likely never need replacing. An added feature is the
inclusion of a front panel 12VDC BNC connector to power external or gooseneck
type lights
.
Please read the following manual carefully to achieve the best results from this
product.
DESCRIPTION
FRONT PANEL
Switched Outlet: AC outlet.
Switch - Turns the Switched Outlet on and off.
Dimmer: Adjusts the brightness of the white LED lights.
12VDC: BNC connector for optional 12 volt lighting.
Power: Main power switch - Turns ALL outlets on and off.
REAR PANEL
100 - 220 VAC 50/60 HZ 10 VA: IEC Power Cord. Connect to a properly ground-
ed AC source. NOTE: REPLACE THE FUSE WITH ONLY THE PROPER RATED
FUSE. INSTALLING A FUSE OTHER THAN THE RECOMMENDED RATING
WILL DAMAGE THE UNIT.
POWER OUTLETS:
8 ea;
AC outlets. Rated for 8 amps maximum each.
INSTALLATION
Mount the RPM26 in a safe and sturdy rack. Connect the IEC power cable to the
RPM26, and to a properly grounded AC outlet.
Connect the power cables from your devices to the power outlets on the rear of
the RPM26.
Audio Device Warning
It is recommended that power amplifiers be switched OFF separate from the
RPM26 - to avoid power surges and possible damage to speakers (and your
ears). Switch power amplifiers
off
first
before
switching off the RPM26, and
switch the power amplifier on
after
the RPM26.
SPECIFICATIONS
AC Outlets: 9 ea; 8 rear panel, 1 front panel
Switches: 2 rocker type
Control: 1 variable Dimmer control
12VDC Out: BNC female connector / 250mA Max.
Voltage Regulation: None
Power: 100 - 230 VAC 50/60 Hz, 10A Max.
Size (W x H x D): 19” x 1.75” x 5” (48 x 4.5 x 12.7)
Weight: 5.5 lbs (2.5 kg)
 previous