Filter
Top Products
OPERATION INSTRUCTIONS
CRYSTALVIEW DVI FIBER INSTALLATION AND OPERATIONS MANUAL
9
Operating instructions
Operation of your computer is no different than having your keyboard,
monitor, and mouse connected directly to the computer. All functions,
applications, upgrades and other items can be done normally. The only
difference is the computer can be up to 33,000 feet away (6,500 feet using
the 3.2 GBit model)
Local access on the CrystalView DVI Fiber allows an additional KVM station
to be connected to the transmitter. The CPU can easily be operated from the
remote KVM station or the local KVM station but not simultaneously.
The transmitter or local unit is active during boot-up and the connected CPUs
video is displayed on both the local and remote KVM stations monitor. To
activate the remote KVM station, simply press any key on the remote KVM
stations keyboard. Control is passed to the remote KVM station. To activate
the local KVM station, press any key on the KVM station’s keyboard.
The dual video models have the capability of connecting the transmitter to two
video sources. The two video sources are sent to the receiver and displayed
on its two video monitors. Video source one should be connected to the
computer’s primary DVI video port that is associated with the keyboard and
mouse.
The USB models only support USB keyboards and mice. Other USB devices
such as Touch Screen, graphic tablets, Barcode readers or similar devices
are supported but not guaranteed. Scanners, web cams, USB drives, etc are
not supported. The CrystalView DVI Fiber (USB models) will only support two
USB devices at the same time.