Filter
Top Products
10
ViewLink CATX INSTALLATION AND OPERATIONS MANUAL
Upon successfully scanning and identifying a supported device, the detected
information shown in Figure 6 will display showing the product type and the
port it is connected to. The ViewLink CATx is ready to flash with the new
firmware.
Figure 6. Flash scan
To load the updated firmware to the ViewLink CATx, click on “File”, then
“Load New Firmware”. Select the downloaded firmware update file to load.
This will be a file with .hex file extension. Figure 7 show the flash update
screen which shows the progress and, when finished, the status of the flash
process. When the message “New firmware successfully loaded on device”
displays, the ViewLink CATx product is updated and ready to use with the
updated firmware.
Figure 7. Firmware update screen
Click on “Help” for additional information and examples.