10/100/1000 PCIe LAN Card RC401-EX User Manual
3
1.2. Package Contents
z Gigabit LAN Host Adapter
z This User’s Manual
z Driver CD
z Low profile bracket
2. Software Installation
2.1. Windows 2000 installation
1. Insert Host Card into an available PCIe slot (or ExpressCard slot).
2. Windows will display the Found New Hardware Wizard, “Ethernet controller”, Click “Next”.
3. Select “Search for a suitable driver for my device (Recommended)” and Click “Next”, and make sure the Driver
CD in your CD-ROM/DVD.
4. Under “Specify a locations” insure that is only checked, and click “Next”.
5. Type in E:\ (If your CD-ROM/DVD is E:\) and click “Browse”.
6. Points specify a location, example E:\1000_GigaNet\Marvell_Yukon\ Windows \WIN2000, and click “OPEN” then
“OK”.
7. When the wizard indicates that it found a driver for the device click “Next”. Then click “Finish”.
2.2. Windows 2003 Server installation
1. Insert Host Card into an available PCIe slot (or ExpressCard slot).
2. Windows will display the Found New Hardware Wizard, “Ethernet controller”. Select “Install from a list or
specific location (Advanced)”, and click “Next”, and make sure the Driver CD is in your CD-ROM/DVD.
3. Select “Search for the best driver in these locations”, and check “Include this location in the search:”
uncheck the other boxes.
4. Type in E:\ (If your CD-ROM/DVD is E:\) and click “Browse”.
5. Points specify a location, example E:\1000_GigaNet\ Marvell_Yukon\ Windows \WIN2003, and click “OPEN” then
“OK”.
6. When the wizard indicates that it found a driver for the device click “Next”. Then click “Finish”.
2.3. Windows XP Server 32bit installation
1. Insert Host Card into an available PCIe slot (or ExpressCard slot).
2. Windows will display the Found New Hardware Wizard, “Ethernet controller”. Select “Install from a list or specific
location (Advanced)”, and click “Next”, and make sure the Driver CD is in your CD-ROM/DVD.
3. Select “Search for the best driver in these locations”, and check “Include this location in the search:” uncheck