Filter
Top Products
5
User Manual
PCI 56Kbps V.92 Data/fax Voice Modem Card RC403
&V - Display Current Configuration and Stored Profile
This command reports the current (active) configuration and the stored (user) profiles.
Syntax
&V
Result Code
OK
Example:
AT&V
ACTIVE PROFILE:
E1 L1 M1 Q0 T V1 X0 &C1 &D2 &G0 &T0
S00:000 S01:000 S02:043 S03:013 S04:010 S05:008 S06:004
S07:050 S08:004
S10:014 S12:050 S16:000 S18:000 S29:070
STORED PROFILE 0:
E1 L1 M1 Q0 T V1 X4 &C1 &D2 &G0 &T0
S00:000 S02:043 S06:004 S07:050 S08:004 S10:014 S12:050
S18:000 S29:070
OK
&W - Store Current Configuration
This command saves the current (active) configuration (profile), including S-Parameters, in the
Registry. The current configuration is comprised of a list of storable parameters illustrated in the
&V
command. These settings are restored to the active configuration upon receiving an Z command
or at power up.
Syntax
&W
Result Code
OK
*B - Display Blacklisted Numbers
This command requests the modem to return a list of blacklisted numbers to the DTE. The format
of
the response is shown by the example below. Permanently forbidden numbers as defined by
country
requirements will not appear on this list. If no numbers are blacklisted, only the OK result code is
issued. Example: NO. - PHONE NUMBER -
------ ------------------------------
1; 4175537660
2; 8288924961
3; 3887278862
4; 3124839442
5; 6284664
OK
*D - Display Delayed Numbers
This command causes the modem to send a list of the delayed numbers together with the delay
associated with each. The modem will return a list of delayed telephone numbers as defined in