Rosewill RC-408 Switch User Manual


 
5/8 port External Power Gigabit Switch RC407/408 User Manual
3
Introduction
The device is a powerful, high-performance Gigabit Ethernet switch, with all ports capable of 10, 100
or 1000Mbps auto-negotiation operation (NWay), which means the switch could automatically
negotiate with the connected partners on the network speed and duplex mode. It is ideal for
micro-segmenting large networks into smaller, connected subnets for improved performance,
enabling the bandwidth demanding multimedia and imaging applications. Moreover, the
10/100/1000Mbps auto-sensing ability provides an easy way to migrate 10/100Mbps to 1000Mbps
network with no pain. Compared to the shared 10Mbps or 100Mbps networks, the switch delivers a
dedicated 10/100/1000Mbps connection to every attached client with no bandwidth congestion issue.
This switch also supports auto MDI / MDI-X function. Each port could be used to connect to another
switch or hub with no crossover RJ-45 cable.
Store-and-forward switching mode promises the low latency plus eliminates all the network errors,
including runt and CRC error packets. To work under full-duplex mode, transmission and reception of
the frames can occur simultaneously without causing collisions as well as double the network
bandwidth.
The switch provides 9K bytes jumbo frames, which means the frames size is larger than normal 1.5K.
With the Jumbo frame function, you can get better network performance, because the switch can
send more data at the same time with lower CPU usage.
The switch is plug-n-play without any software to configure and also fully compliant with all kinds of
network protocols.
Before you start to install the switch, check the following contents in this package
One Gigabit Ethernet switch
One external power adapter
Screws and wall-mount plastic
User’s manual