Rosewill RCR103 Network Card User Manual


  Open as PDF
of 3
 
CARD READER RCR103 USER’S Manual
3
Software Installation
If your operation system if Windows 95/98/98SE, please install the driver.
1. Put the CD packed with the RCR-103 into the CD-ROM drive.
2. The InstallShield Wizard will be popped out.
Please follow the on-screen introduction to finish the installation.
Change the front panel
1. Remove the upper cover of the RCR-103.
2. Apply a suitable size of the screwdriver with the flat head and
insert the screwdriver into the gap showed on the picture.
Gently press the locked tab and push onward to make front
panel out.
3. Apply the same procedure of the step 3 and step 4 on the other
side of the front panel and install the desired front panel to the
RCR-103.
Thank you for purchasing a quality Rosewill Product.
Please register your product at : www.rosewill.com for complete warranty information and future support
for your product.
GAP
 previous