Rosewill RCW604 Network Card User Manual


  Open as PDF
of 5
 
4
User Manual
USB 2.0 To IDE Cable For 2.5"/3.5"/5.25" Drive With Power Adapter RCW604
Notification
1. RCW-604 can only support one ATA/ATAPI device of 2.5” or 3.5” one time. This means that if
you connect a 2.5” HD to 2.5” port, 3.5” port will be no function during the operation of 2.5”
HD.
2. There is no different between the jumper setting of “Master” or “Slave” on your ATA/ATAPI
device working with RCW-604.
3. Please take off the ATA/ATAPI device from RCW-604 only after you turn off the power to avoid
any damage.
4. If you plug RCW-604 and HD to PC, PC might freeze during the beginning of booting. In this
case, you may unplug RCW-604 at the start of booting and re-plug it after PC enters windows.
5. If PC can’t detect RCW-604 and HD in windows, please try the following. Unplug RCW-604
nd try to reboot the PC. Re-plug it after system enters windows. If all above still can’t help, it
might be caused by the incompatibility between HD, system or controller chipset.
Please contact us for more support.
Thank you for purchasing a quality Rosewill Product.
Please register your product at : www.rosewill.com/
for complete warranty information and future support for your product.
If you have any question while using our products, please feel free to contact us at
feedback@rosewill.com .
 previous