Rosewill RHUB-310 Switch User Manual


  Open as PDF
of 3
 
7 port USB2.0 HUB User Manual
3
Feature
1. Compliant with USB Specification Rev. 2.0 (Data Rate 1.5/12/480
Mbps)
2. Backward Compatible to USB 1.1
3. 7 (Max.) downstream facing parts high-speed (480Mbps),
full-speed(12Mbps), and low-speed (1.5Mbps) transaction.
4. Supports self-powered mode & DC Adapter.
5. Supports Over-current detection and individual power control.
Installation
Using DC adapter
Plug the DC plug into DC jack located on the rear panel of this Hub
1. Plug the AC adapter into an electronic outlet.
2. Plug the mini B-type connector into the “upstream”
3. Plug the A-type connector into the PC host port
4. Connect USB devices to the Hub downstream 1-7
Using USB bus-powered
1. For bus-powered mode, the USB provide 500mA for all
downstream & hub, each port shares with 100mA current.
2. Plug the mini B-type connector into the “upstream”
3. Plug the A-type connector into the PC host port
4. Connect USB devices to the Hub downstream 1-7
Thank you for purchasing a quality Rosewill Product.
Please register your product at : www.rosewill.com for complete warranty information and
future support for your product.
 previous