Filter
Top Products
USB 3.0 Gigabit Ethernet Adapter - RNG-406U- User’s Manual
5
Chapter 2: Getting Started
2.1 Hardware Installation
1. Plug the USB 3.0 to Gigabit Ethernet Adapter directly
into an available USB 2.0 port (Recommend USB 3.0
port) on your computer.
2. Connect one end of your network cable into the RJ45
port of USB 3.0 to Gigabit Ethernet Adapter.
3. Connect the other end of the network cable into an
available Ethernet port on your router, switch, or any
other networking device.
2.2 Driver Installation
The following section shows you how to install the USB
3.0 to Gigabit Ethernet Adapter driver on different
operating systems.
Important! Do not connect the USB 3.0 to Gigabit
Ethernet to your PC before the install.
2.2.1 Installation for Windows XP / Vista / 7
1. Insert the provided CD into your disk drive. The
CD-ROM will start automatically. The following screen
will show up and please click “Install Driver”.