Filter
Top Products
Internet Camera RXS-3323/RXS-4324 Quick Installation Guide
Connecting to the Camera
Using IPWizard II:
After the installation of the IPWizard II, double click on the icon, you will s
this window popup as the basic management of the IPWizard II. Once it popup, the
wizard will perform an auto search to see if you have any camera in the Network.
ee
The window below is an example of what this may look like:
1. Device Title
This part shows the Device name found in the network
2. IP address
Here shows the IP address of the found Camera
3. Port
Here shows the Port used of the found Camera
4. Minimize and Close
Window
The orange circle will minimize the window and the red circle will close
this window
5. MAC
This shows the MAC address of your Camera
Double Click on the above information bar will open up the Camera
management page in your default Web Browser.
6. Search
When launch the IPWizard II, a searching window will pop up. IPWizard II
is starting to search Network Cameras on the LAN. The existed devices will
be listed.
9