Filter
Top Products
PL-910/1310
7
Symptom Solution
Motor does not work. Check to make sure machine is plugged in. Check to make sure the power button is turned on.
Pouches are not laminating correctly.
Make sure that the machine is set to the correct setting. The setting should be the same as
the thickness of the pouch you are using. Ex.75 mic pouch film should be set to 3 mil setting.
The machine is beeping and the pouch
is returning out of the front of the
machine.
The automatic reverse function has turned on to retrieve the item. The item you are laminating
may be jammed or too large to pass the rollers. Wait for the pouch to exit the front of the
machine. You can try laminating again after 15 seconds.
The rollers are moving, but the
laminated item is not.
Hold down the reverse button until the entire pouch has exited the front of the machine. You
can try laminating again after 15 seconds.
TROUBLESHOOTING
If you are still having complications, please contact Royal Sovereign’s Service Center at 1-800-397-1025.
SPECIFICATIONS
Model PL-910 PL-1310
Dimensions
17.6x7.3x4.6 in
448x186x118 mm
21.6x7.3x4.6 in
548x186x118 mm
Maximum laminating width 9 " / 235 mm 13"/ 340 mm
Maximum laminating thickness 27.6 mil / 0.7 mm
Film thickness 3~10 mil / 75~250 micron
Number of roller s 4
Cold mode Yes
Heating system Hot shoe
Ready time 4 min
Motor type AC motor
Laminating speed 20" per min. / 430 mm per min.
Weight 8 . 4 l b s / 3. 8 k g 15.4 lbs / 7 kg
Voltage/Cycle 120V, 60Hz
Power consumption 4 5 0 W 730 W