Filter
Top Products
COLD
LAMINATING PROCEDURE
1. Turn the power switch to the (=) COLD position. The
power indicator will light up. The machine is now
ready to laminate in the cold mode.
2. Place the document to be laminated on the adhesive
side of the cold film with the document face down.
3. Insert the document to be laminated into the front
opening of the machine.
4. Remove paper liner from the cold film slowly while the
document is being inserted into the machine.
6
NOTE: When switching the machine from the hot to cold mode, the ready
indicator light will shut off. Please wait 30 minutes to cool down before
inserting your document.
RPA-5954R/5254R