Filter
Top Products
RSH-1151/1651
43
3. INSTALLATION
Note: The laminator should be installed by a trained service technician.
ELECTRICAL REQUIREMENTS
POWER SUPPLY
The laminator comes fully assembled, except for the feed table and paper guide to avoid
shipping damage. Upon arrival, thoroughly inspect the unit. It is imperative that any
shipping damage is reported and a claim is filed with the delivering carrier immediately
upon receipt.
The laminator should be located in an area with adequate work space for feeding graphics
and lamination materials.
Avoid placing the laminator in a dusty area or near sources of extreme heat or cold.
Once the laminator is in place, lock the casters into position(“ON” position). Always unlock
the casters (“OFF” position) when moving to a different location.
4. INCLUDED WITH LAMINATOR
Thoroughly inspect the parts and the unit. It is imperative that any missing parts are
reported and a claim is filed with the reseller immediately upon receipt of shipment.
Royal Sovereign recommends that a licensed electrician ensures proper power to your
laminator in accordance with electrical codes in your area.
The laminator should have a dedicated power line.
230V UL 220V EU 240V UK
Part Name
Laminator
Owner's Manual
Registration Card
3´´(76mm) / 2" (57mm) Auto Grip
L-wrench (2.5)
Dust Cover
Spare Motor Fuse - FUSE(50T)
( 6.3A)
Spare Main Power Fuse - FUSE(65TS)
15A(RSH-1151) / 20A(RSH-1651)
Roll film Samples
8 - 1/4"Hexa head Bolt (M6
20mm)
8 - Spring Washer(
6.1)
(Included with option only)
Front Feeder and Rear Rewinder Kit
(Included with option only)
1
1
1
4/2
1
1
1
1
2
8/8
2/2
Quantity Picture
12 - 3/16"screw (M5 10mm).
12 - Spring Washer(
5.1)
(Included with option only)
12/12
AC 220~240V, 50/60Hz, Single phase