Filter
Top Products
RSS, RSR, RSH Series
43
3. INSTALLATION
Note: The laminator should be installed by a trained service technician.
ELECTRICAL REQUIREMENTS
The laminator comes fully assembled, except for the feed table and paper guide to avoid
shipping damage. Upon arrival, thoroughly inspect the unit. It is imperative that any
shipping damage is reported and a claim is filed with the delivering carrier immediately
upon receipt.
The laminator should be located in an area with adequate work space for feeding graphics
and lamination materials.
Avoid placing the laminator in a dusty area or near sources of extreme heat or cold.
Once the laminator is in place, lock the casters into position(“ON” position). Always unlock
the casters (“OFF” position) when moving to a different location.
4. INCLUDED WITH LAMINATOR
Thoroughly inspect the parts and the unit. It is imperative that any missing parts are
reported and a claim is filed with the reseller immediately upon receipt of shipment.
Royal Sovereign recommends that a licensed electrician ensures proper power to your
laminator in accordance with electrical codes in your area.
The laminator should have a dedicated power line.
MODEL
RSS-685 / RSS-1050 /
RSR-685 RSR-1050 RSH-1050 RSH-1650
RSS-685N RSS-1050N
Power supply AC 200 ~ 220V, AC 230 ~ 240V, 50/60HZ Single phase
Part Name
Laminator
Owner's Manual
Heating Element Installation Instruction
(RSH-1650 SERIES)
Registration Card
3´´(76mm) / 2" (57mm) Core Plugs
Core - Bolts
Dust Cover
Spare Motor Fuse - FUSE(50T)
6.3A
Spare Main Power Fuse - FUSE(65TS)
15A / 20A(only RSH-1650)
Roll film Samples
8 - 1/4"Hexa head Bolt (M6
20mm)
8 - Spring Washer(
6.1)
(Included with option only)
Front Feeder and Rear Rewinder Kit
(Included with option only)
1
1
1
1
4/2
6
1
1
1
2
10/10
2/2
Quantity Picture
12 - 3/16"screw (M5 10mm).
12 - Spring Washer(
5.1)
(Included with option only)
12/12
230V UL 220V EU 240V UK