Filter
Top Products
14
10.TROUBLE SHOOTING GUIDE
Symptom Cause Possible Solution
Rollers do not operate after the RUN/
STOP button is pressed
1.Safety cover is opened
2. Power cord is not plugged in
3. Front table is not on properly
4. Machine is not turned on
1. Check safety cover is
properlyclosed
2. Plug in the power cord
3. Check installed properly
4. Turn the machine on
Roller is not heating Call your authorized dealer Call your authorized dealer
Poor Lamination
1. Film tension is unbalanced.
2. Lower idler bar is not located in
proper position
3.Wrong temperature / speed setting
1. Adjust film tension
2. Push idler bar in proper position
3. Follow manufacturers
recommended temperature and
speed