Filter
Top Products
4) Disassemble the Bush-Roller, Up holding the upper heater.
< Take off Bush-Roller, Up from Laminating Roller >
5) Disassemble the lower and upper heater from the roller cautiously
6) How to assemble is the reverse order of how to disassemble , 5)→4)→3)→2)→1).
When inserting the heater into the roller, rotate the heater slightly
and the heater enter the roller smoothly.
3.7. Cross Cutter
1) Disassemble both the Right cover and the Left cover (Refer to No.1, No.2) .
2)a. Unfasten 6 screws holding the Frame-Upper.(RSL-2701/2701U)
b. Unfasten 1 screw on the Frame-cutter.(RSL-380)
<RSL-2701/2701U> <RSL-380>
16