Royal Sovereign RSL-380 Laminator User Manual


  Open as PDF
of 7
 
1312
RSL-380
Rollers do not operate
after the RUN/STOP
button is pressed
Roller is not heating
Poor Lamination
Problem Cause Remedy
1.Safety cover is open
2. Power cord is not
plugged in
3.Machine is not turned on
Call your authorized
dealer
1. Film tension is
unbalanced.
2. Lower idler bar is not
located in proper
position
3.Wrong temperature/
speed setting
1. Check safety cover is
properly closed
2. Plug in the power cord
3. Turn the machine on
Call your authorized dealer
1. Adjust film tension
2. Push idler bar in proper
position
3. Follow manufacturers
recommended
temperature and speed
10. SPECIFICATIONS
9. TROUBLE SHOOTING GUIDE
Description RSL-380
Power supply AC 100,200,220~240V 50 / 60Hz 120V 60Hz
Power consumption 1200W
Max laminating width 350mm / 14"
Film thickness 25~125 mic / 1~5mil
Max laminating speed 3m/min / 9.9ft/min
Ready time 10 min
Heating method Hot Roller
Driving motor DC geared motor
Temperature contro
l Digital(micom)
Speed control
10
settings
Transport type 4 Roller
Cooling system No
Side cutter No
Cross cutter Yes
Film alignment No
Hot lamination Yes
Cold lamination No
Reverse Yes
Dimensions (w d h) 550 520 320(mm) / 21.7" 20.5" 12.6"
Unit weight 30kg / 66.1Ibs
 previous