RuggedCom RS500 Switch User Manual


 
2
2008 RuggedCom Inc. All rights reserved Rev101
Federal Communications Commission Radio Frequency Interference
Statement
This equipment has been tested and found to comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses and cad radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference on his own expense.
Warning: Changes or modifications not expressly approved by RuggedCom Inc. could void the
user’s authority to operate the equipment.
Trademarks:
Ethernet is a trademark of Xerox Corporation
RuggedSwitch is a registered trademark of RuggedCom Inc.
Important:
The RS500 contains no user serviceable parts. Attempted service by unauthorized personnel shall
render all warranties null and void.
The RS500 should be installed in a restricted access location where access can only be gained
by service personnel or users who have been instructed about the reasons for the restrictions
applied to the location and about any precautions that shall be taken; and access is through the
use of a tool or lock and key, or other means of security, and is controlled by the authority
responsible for the location.