Runco CL-710LT Projector User Manual


 
1. Overview
Runco CL-710/ CL-710LT User’s Manual
5
Controls and Functions
Control Panel
1. POWER LED
Indicate the status of the power
Orange when the AC power cord is plugged into the wall outlet (standby mode). Once in the
standby mode, you can turn on the projector by pressing the ON key on the remote control for
ONE second.
Green when the power is turned on (operational mode).
Flashing Orange for the first 45 seconds after power-up indicating that the lamp is warming up.
Flashing Green for 90 seconds after the projector was powered off indicating that the lamp is
cooling down.
2. LAMP LED
Indicates the status of lamp
Red when the lamp has developed a problem. Please contact your Runco Dealer for assistance.
3. ZOOM RING
Adjust the size of the image
Rotate right to enlarge the image, and rotate left to make the image smaller.
4. FOCUS RING
Adjust the focus of the image
Rotate the focus ring right or left to focus the image.