Filter
Top Products
INPUT 3
INSTALLER ADJUST
PICTURE
CONTRAST : 128
BRIGHTNESS
: 128
COLOR
: 64
TINT
: 30
SHARPNESS
: 8
WHITE BAL.
SCREEN
SET UP
OPTION
INPUT 3
INSTALLER ADJUST
PICTURE
R. GAIN : 128
G. GAIN
: 128
B. GAIN
: 128
R. OFFSET
: 128
G. OFFSET
: 128
B. OFFSET
WHITE BAL. DEFAULT
WHITE BAL.
SCREEN
SET UP
OPTION
INPUT 3
INSTALLER ADJUST
PICTURE
H SHIFT : 64
V SHIFT
: 64
H. SIZE
: 32
V. SIZE
: 32
SCREEN DEFAULT
WHITE BAL.
SCREEN
SET UP
OPTION
INSTALLER MENUS for VIDEO NTSC, PAL or DIGITAL 480P and HDTV
INSTALLER ADJUST Menus for Video NTSC, PAL or Digital 480p & HDTV
16
1. PICTURE Tab
Make initial picture adjustments for each input independently.
Refer to the PICTURE description in the OSD for Video
NTSC, PAL Digital 480p and HDTV or PC/HDTV-I, D-Sub
Input Menus for guidance.
2. WHITE BAL. Tab
White balance is global for all presets and allows for
configuration of R, B, G levels GAIN and OFFSET. Choose
the middle color temp from the main menu and adjust in this
menu for proper 6500K color temperature. The other presets
in the user menu will be offset by approximately 1000K
higher or lower depending if the preset is cooler or warmer.
3. SCREEN Tab
Adjust positioning of image horizontal and vertical position
for each input if necessary. Screen Default will set back the
factory settings for the current input only.
These menus will appear only when displayed for video.
Gaining access to the INSTALLER ADJUST Menu is done by pressing the installer adjust button below SDTV-2 button
(number 4) using a small paperclip (with no menu present). Press menu at any time to exit INSTALLER ADJUST
mode. The adjustments are stored automatically. (see page 12)
INPUT 3
INSTALLER ADJUST
PICTURE
C.DETAIL RED : 30
C.DETAIL YELLOW
: 30
C.DETAIL GREEN
: 30
C.DETAIL CYAN : 30
C.DETAIL BLUE
: 30
C.DETAIL MAGENTA
: 30
PICTURE DEFAULT
WHITE BAL.
SCREEN
SET UP
OPTION